Type
• White sintered activated carbon filter element—10″
• Blackhead with skeleton sintered activated carbon filter—10″
• Granular activated carbon filter element—10″
Specification
Length Series: 10″ | 20″ | 30″ | 40″
Diameter(±1mm):
• OD: 65~70mm
• ID: 28~30mm
Precision: 5~10μm
Main Performance
• Specific Surface: 800~1000㎡/g
• CCl₄ Adsorption: 50~60%
• Benzene Adsorption: 20~25%
• Ash Content: ≤3.5%
• Iodine Value: ≥800~1000mg/g
• Methylene Blue: 14~16ml/g
Availability: | |
---|---|
Quantity: | |
Enkonduko:
Activated carbon filter is based on high-quality fruit shell carbon and coal activity as raw materials, supplemented by edible grade adhesive, the use of high-tech technology, through special processing, it sets adsorption, filtration, interception, catalytic action in one, can effectively remove organic matter, residual chlorine and other radioactive substances in the water, and has the effect of decolorization, odor removal. It is an ideal new generation product in the liquid and air purification industry at present.
Application:
Water Purifiers: Removes residual chlorine (96.3% efficiency), improves taste, and adsorbs organics (e.g., benzene).
Beverage Decolorization: Enhances clarity by adsorbing pigments.
Edible Oil Refinement: Filters suspended particles to extend shelf life.
Injectable Solutions: Removes particulates/pyrogens for sterility.
Solvent Purification: Adsorbs impurities (e.g., toluene) to industrial-grade purity.
VOC Recovery: Captures benzene/H₂S (82–170g per filter).
Oilfield Fluids: Filters solids/colloids (0.7MPa pressure resistance).
Ultrapure Water: Pre-filtration for semiconductor cleaning (5–10μm precision).
Wastewater Treatment: Removes heavy metals (e.g., Hg, Cr⁶⁺) and cyanides.
Air Purification: Eliminates toxic gases (e.g., toluene, chloroform).
Key Features:
Standards: FDA/USP-compliant for food/pharma use.
Performance: High iodine value (≥1000 mg/g), low ash (≤5%).
Enkonduko:
Activated carbon filter is based on high-quality fruit shell carbon and coal activity as raw materials, supplemented by edible grade adhesive, the use of high-tech technology, through special processing, it sets adsorption, filtration, interception, catalytic action in one, can effectively remove organic matter, residual chlorine and other radioactive substances in the water, and has the effect of decolorization, odor removal. It is an ideal new generation product in the liquid and air purification industry at present.
Application:
Water Purifiers: Removes residual chlorine (96.3% efficiency), improves taste, and adsorbs organics (e.g., benzene).
Beverage Decolorization: Enhances clarity by adsorbing pigments.
Edible Oil Refinement: Filters suspended particles to extend shelf life.
Injectable Solutions: Removes particulates/pyrogens for sterility.
Solvent Purification: Adsorbs impurities (e.g., toluene) to industrial-grade purity.
VOC Recovery: Captures benzene/H₂S (82–170g per filter).
Oilfield Fluids: Filters solids/colloids (0.7MPa pressure resistance).
Ultrapure Water: Pre-filtration for semiconductor cleaning (5–10μm precision).
Wastewater Treatment: Removes heavy metals (e.g., Hg, Cr⁶⁺) and cyanides.
Air Purification: Eliminates toxic gases (e.g., toluene, chloroform).
Key Features:
Standards: FDA/USP-compliant for food/pharma use.
Performance: High iodine value (≥1000 mg/g), low ash (≤5%).
Type | |
---|---|
Type | •White sintered activated carbon filter element—10″ •Blackhead with skeleton sintered activated carbon filter—10' •Granular activated carbon filter element—10″ |
Specification | |
Length | 10″ | 20″ | 30″ | 40″ |
Diameter | outer diameter:65~70mm inner diameter:28~30mm (±1mm) |
Precision | 5~10μm |
⚙️ Main performance | |
Specific surface are | 800~1000㎡/g |
Carbon tetrachloride adsorption rate | 50~60% |
Benzene adsorption capacity | 20~25% |
Ash moisture content | ≤3.5% |
Yield ratio | ≥800~1000mg/g |
Methylene blue adsorption value | 14~16ml/g |
Type | |
---|---|
Type | •White sintered activated carbon filter element—10″ •Blackhead with skeleton sintered activated carbon filter—10' •Granular activated carbon filter element—10″ |
Specification | |
Length | 10″ | 20″ | 30″ | 40″ |
Diameter | outer diameter:65~70mm inner diameter:28~30mm (±1mm) |
Precision | 5~10μm |
⚙️ Main performance | |
Specific surface are | 800~1000㎡/g |
Carbon tetrachloride adsorption rate | 50~60% |
Benzene adsorption capacity | 20~25% |
Ash moisture content | ≤3.5% |
Yield ratio | ≥800~1000mg/g |
Methylene blue adsorption value | 14~16ml/g |